NI DP Refresher Course & Competency Assessment

NI DP Refresher Course & Competency Assessment
Accredited by Nautical Institute

Tidewater DPEC Global Training provides commercial DP training to all maritime Officers at the Tidewater and Wärtsilä joint venture Training center in Amelia (New Orleans) and in Manila with the Nautica Maritime Training and Assessment Center in association with Tidewater.

To verify a certificate issued for “NI DP Induction course” please email us the details on the certificate.

• Name
• Date of birth
• Certificate number

To: cstuart@tdw.com and we will email you with a confirmation.

TRAINING SCHEME

CONTENTS
INTRODUCTION
MINIMUM ENTRY QUALIFICATION REQUIREMENTS
NUMBER OF HOURS
RATIO OF STUDENTS/INSTRUCTORS/EQUIPMENT
DELIVERY METHOD
COURSE AIMS
COURSE OBJECTIVES
COURSE ASSESSMENT
ONLINE ASSESSMENT
PRACTICAL ASSESSMENT
MARK SHEET EXAM NUMBER 1 (Practical Assessment)
DP CHECKLIST

Introduction

The Nautical Institute (the NI) has introduced a DP Refresher and Competency assessment course as a result of NI Training centers running the NI DP revalidation course reporting the benefit of using the NI DP Revalidation course as a DP refresher course and competency assessment.

  • The Course is an accredited course with the course content and notes controlled by the Nautical Institute. This will ensure an excellent standard across the DP Industry.
  • Course content is to match exactly the NI DP Revalidation course.
  • The course certificate will have the same logo as the NI DP Revalidation course.
  • Certificate name “Nautical Institute DP Refresher and Competency assessment”
  • The course is only available for DPOs with current DPO certificates.
  • The course allows DPOs who have not been on working DP vessel a method to refresh their knowledge about DP operations, DP Bridge teamwork, Emergency DP resource Management and to stay current with the latest industry guidelines.
  • The course has a significant component of simulations which include failures, and this will be of particular benefit to DPOs who work on vessels that are on DP 24/7.

Minimum entry qualification requirements

The minimum entry requirement is a DPO Certificate issued by the NI. The original DPO Certificate should be presented at the DP centre where the DP Refresher Course is completed.

The DP Refresher and Competency Assessment Course may be completed at any time as required.

Number of hours 

A minimum of 34 hours of teaching and simulator time is required for this course which includes the time needed for the examination and assessments. The course must schedule both practical and theoretical aspects with about 50% of the time assigned to each. The course is to be delivered over five days.

Ratio of students/Instructor/equipments

The NI allows a maximum of four students per class being taught by one instructor per one Class B or A Simulator.

By exception and where justified, five or six students may be considered at the discretion of the NI’s Accreditation Team, based on the number of simulators in place, rotation of students and the use of the training methodology in place.

When two different types of simulator systems are available in a training centre, the best practice is to keep the trainee on the same simulator throughout the course.

A minimum requirement is to use a NI DP Class B Simulator to correspond with the training objectives for the Revalidation Course.

Delivery Method

Training will be split equally between theory and practical exercises. The theory may be used to support the practical exercises either as a briefing, a de-briefing or for demonstration purposes.

Course Aims

The course is intended for those who have already been issued a DPO Certificate from the NI and required to refresh their knowledge about DP or need to completed high DP simulator because they are on DP 24/7 The overall course aim is to update the DPOs with the latest rules and regulations, position references and sensors, known DP incidents and lessons learned. At the end of the course, the student should:

  • Have acquired knowledge of the latest rules and regulations
  • Have acquired knowledge of the latest developments within sensors and PRS
  • Have acquired knowledge of the latest relevant DP incidents and why they occurred
  • Be able to recognize the various alarm, warning and information messages
  • Carry out operational planning, risk assessment and hazard identification tasks
  • Set up the DP system for a particular task/operation
  • Decide on courses of action because of systems failure

Course Objectives

The following is a list of the objectives which should be attained by the DPOs upon completion of the Revalidation Course.

By the completion of the training session or period for DP Rules and Regulations the trainee should be able to:

  1. List the various providers of documents containing statutory requirements and guidance relating to DP operations, including:
    1. IMO (including IMO MSC/Circ. 645 of 1994 and 1580 of 2017 Guidelines for Vessels with Dynamic Positioning Systems)
    2. Classification society DP rules
    3. International Marine Contractors Association (IMCA)
    4. Marine Technology Society (MTS)
    5. IMCA and MTS guidelines for ASOG
  2. Explain the purpose of documentation associated with DP operations, such as DP operations manuals, Failure Modes and Effects Analysis (FMEA) and capability plots
  3. Describe the IMO (DP) equipment classes and their application, with reference to the IMO Guidelines for Vessels with DP Systems.
  4. Understand the importance of reporting DP incidents knows where to find DP incident reports and knows how to report DP incidents.

By the completion of the training session or period for DP Sensors and PRS the trainee should be able to:

  1. Describe the following position reference systems commonly associated with DP installations: Differential GNSS, hydroacoustic, INS, taut wire, Artemis, FMCW Radar and laser-based systems.
  2. Describe the failure modes of the following position reference systems: Differential GNSS, hydroacoustic, INS, taut wire, Artemis, FMCW Radar and laser-based systems.
  3. Describe the following sensors associated with DP installations: vertical reference sensor/unit, motion reference unit, gyro compass, wind sensor (anemometer) and draught input sensor. ASOG, TAM and CAM.
  4. Describe the failure modes of the following sensors: vertical reference sensor/unit, motion reference unit, gyro compass, wind sensor (anemometer) and draught input sensor.

By the completion of the training session or period for DP Set Up the trainee should be able to:

  1. Ensure the vessel is on DP in accordance with the vessel’s class and the vessel’s operation manual. Class approved FMEA and ASOG (Complete DP Checklist)
  2. Determine and set alarm and warning limits
  3. Evaluate most appropriate PRS for specific DP-operations
  4. Select the number of position reference systems required in accordance with the DP class
  5. Use correct thruster allocation for a specific operation and weather conditions
  6. Test vessel’s maneuvering capability during prevailing weather conditions
  7. Determine a Safe Position and minimum distances to stabilize the vessel in DP
  8. Obtain information and clearance from e.g. installation, on issues important for the safe operation of the vessel under DP.

By the completion of the training session or period for DP Bridge Watchkeeping the trainee should be able to:

  1. Demonstrate a continuous awareness of the vessel’s status, operation and impact of operating under DP
  2. Recognise the importance of maintaining lookout and awareness of the external situation including weather when controlling a vessel close to installations or other objects
  3. Recognise situations in which to call the Master to the bridge
  4. Log and report DP station keeping events
  5. Monitor position reference systems, sensors and signal quality in anticipation of the possibility of failure causing instant/violent reaction from main engines/thrusters
  6. Monitor power output and thrust
  7. Monitor thruster efficiency for station-keeping at different headings and drafts, which may affect DP Class
  8. Recognise DP-related changes in vessel systems and technical equipment which may affect DP Class
  9. Recognise technical and operational issues which may limit or stop DP operations
  10. Monitor that the DP operating parameters of continuous operating power are not exceeded.

By the completion of the training session or period for Position Keeping the trainee should be able to:

  1. Recognise alarms related to the incorrect operation of the DP-system and maintaining position
  2. Acknowledge alarms within time constraints
  3. Discuss alarms with the relevant department
  4. Evaluate the possible consequences of each alarm and possibility to continue the operation
  5. Analyse the consequence analysis alarm
  6. Interpret visual indicators, indicating conditions which may result in malfunction of DP
  7. Monitor movement of the vessel and changes in the position and heading, in keeping with safe excursion limits depending upon the ongoing task/operations
  8. Monitor movement of the object / installation / target
  9. Monitor by various means, changes in distance/heading between an object and own vessel (if applicable)
  10. Recognise limitations of vessel movement when having equipment or divers deployed.

By the completion of the training session or period for Environmental Conditions the trainee should be able to:

  1. Recognise changes in environmental conditions
  2. Recognise when environmental conditions become critical with reference to station keeping
  3. Recognise the increased importance of situational awareness when operating close to floating objects.

By the completion of the training session or period for Alarms and Indicators the trainee should be able to:

  1. Identify the procedures to follow for DP and non-DP alarms
  2. Identify the procedures for when to change DP Alert status (e.g. from green to amber/yellow, or red).

By the completion of the training session or period for Change of DP Watch the trainee should be able to:

  1. Prepare a hand-over checklist
  2. Transfer vessel’s status and DP-details when handing over the watch (where not covered by the watch- keeping checklist)
  3. Provide an update on the ongoing operation and planned operational activities
  4. Review a hand-over checklist
  5. Verify the vessel’s position or movement and status
  6. Interpret all necessary information of vessel and operation
  7. Take-over / hand over DP-watch in a formal and clear manner
  8. Determine the DP-status and recent occurrences which may have an effect on the DP-operation during the watch.

By the completion of the training session or period for Normal Completion of a DP Operation the trainee should be able to:

  1. Identify safe departure route and best vessel heading for departure
  2. Recognise external dangers prior to departure
  3. Identify an Emergency Escape route which may or may not be the same as the normal departure route
  4. Retrieve Position Reference System Equipment from e.g. the installation or seabed (if applicable and as part of a Departure checklist)
  5. Demonstrate moving to a safe position in appropriate steps
  6. Recover/retract deployed equipment (if applicable).

By the completion of the training session or period for Operating in Joystick Mode (DP Joystick) the trainee should be able to:

  1. Stop the vessel at a predetermined position
  2. Determine the need to stop the vessel completely before switching to DP control (system specific)
  3. Operate the DP Joystick to maintain position and/or heading in a controlled and safe manner
  4. Operate the DP Joystick to change position and/or heading in a controlled and safe manner
  5. Demonstrate DP Joystick station-keeping of the vessel under prevailing weather conditions.

By the completion of the training session or period for Emergency Situation the trainee should be able to:

  1. Move the vessel to a safe position in a safe and controlled manner
  2. Demonstrate an awareness of the Emergency Escape Route.

By the completion of the training session or period for Emergency Performance/Response the student must demonstrate at least two of the following:

  1. Demonstrate actions in case of unstable Position Reference System(s)
  2. Demonstrate actions when losing Position Reference System(s)
  3. Demonstrate actions if Position Reference System(s) suddenly indicate significant changes in position/range/bearing data
  4. Demonstrate actions in case of error in wind input
  5. Demonstrate actions in case of a DP drive-off
  6. Demonstrate actions in case of a DP drift-off
  7. Demonstrate actions in case of a DP force-off
  8. Demonstrate actions in case of one thruster runoff
  9. Demonstrate actions in case of error in sensor input
  10. Demonstrate the proper sequence of actions if experiencing an onboard emergency which may influence DP-control during DP-operations
  11. Explain actions when losing all DP control functions
  12. Explain the proper sequence of actions if colliding or about to collide with an installation, nearby objects or vessels during DP-operations.

Course Assessment

The assessment for the DP Refresher and Competency assessment Course includes a theoretical (NI online) exam and a practical assessment. Each component must be completed successfully. There is no specific order in which they must be completed. After the course is completed, an entry will be made in the appropriate logbook.

Online Assessment

In order to be awarded a certificate of completion for the DP Refresher and Competency assessment Course, the DPO must pass an online assessment at the training centre.

The exam is composed of multiple choice questions that have already been developed from the Basic

/Induction Course and the Simulator Course. The online assessment will consist of 30 questions and shall be completed in one hour with a pass mark of 70%.

Students who fail the first attempt are allowed to have another two attempts within six months of the first attempt; however, the second attempt must be undertaken within 96 hours of the first attempt. If the student fails these three attempts, they are a student is required to repeat the Refresher course and competency Assessment Course and undertake the assessment again.

Practical Assessment

The practical assessment must be done individually. The practical assessment shall include the following items which the student must pass to be awarded a certificate of completion for the Course:

    • Complete a DP Checklist
    • Set up the vessel on DP
    • Move the vessel from setup position to a worksite
    • Deal with a system/sensor/thruster failure or environmental change (at least two)

The training centres must develop their own practical exams based upon the course objectives listed above.

The student must pass all the four items listed above. The training centre is responsible to ensure that the assessment is carried out in a professional manner and that the student is assessed with thoroughness in line with the standards of the NI.

Practical Assessment Guidance for Training Centres

Below you will find guidance for the development and the examination process for the practical assessment for the Revalidation Course.

      1. General Guidance
        • Duration of practical assessment: Between one and two hours
        • Pass or fail criteria: This item will be the most challenging. The student performance is evaluated by the instructor and in an ideal world; such an evaluation should be objective. Although the student must pass all items it could be that some items are performed as a “pass” whilst other items could be defined as “fail”. It will be the overall performance of the student which determines if the practical assessment is a pass or fail. Failing for example, to identify a small position deviation from one of the PRS inputs would not necessarily mean that the student failed. Failing to identify that the vessel has lost DP Class and that the vessel is now operating without redundancy, would. Depending on the nature of the fail it is up to the DP Training Centre to determine if the student should be allowed to retake the practical assessment. If the fail is related to safety critical items, as determined by the Training Centre, the student should not be allowed to retake the assessment, but should retake the course. Reason(s) for failing the student should be given to the student in writing.
        • Students who fail at the first attempt, and are allowed to retake the practical assessment, can do this only once. The second attempt must be agreed with the DP Training Centre and carried out at their convenience.
      2. Practical Assessment Scenario Guidance

Exam Scenario

After passing the written exam, each student will randomly draw a number linked to the scenario he/she will be examined on.

Scenarios are to be based on the course training objectives. All scenarios should be equal in complexity.

Each scenario will end with the vessel located at a worksite in close proximity to a platform/structure. This could be a fixed platform, a semi-submersible rig, another vessel, etc.

Based on the task to be performed by the vessel (at the worksite), there should be at least two possible locations where the vessel can be positioned to complete the task (one drift on and one drift off). The student will be expected to choose the better of the two. The following are two examples of scenarios that could be used. The vessel might be required to do an ROV inspection of a platform where there is sufficient tether available to work at both locations. The vessel might be required to position under a crane for cargo operations where there are two cranes available (one upwind and one downwind).

Each centre shall develop its own practical exam scenarios based on the DP equipment fitted and the simulated platforms/structures it has available.

The centre will have 10 to 15 scenarios available for exam purposes. This will permit all students to have a random selection. Multiple scenarios can be created by using the same structure/vessel/task and simply changing the environmental conditions.

Time for planning the practical assessment shall be allocated to the student. Before the exam (20 minutes), each student will be presented with his/her scenario. This will permit the student time to develop a plan as to how they will proceed. One student can carry out the exam while the other is planning, this will save time during the exam process.

Prior to starting the exam, the student will be asked to state the planned vessel position and heading when at the final worksite. The student will also state the direction from which (bearing) he/she will approach the worksite and the desired heading at exercise start. All students will start at the same distance from the worksite. Before starting the exam, the instructor will place the vessel (exercise start position) on the bearing and be heading specified by the student.

Checklist/Set up on DP

The DP checklist below is a sample only. It indicates the extent to which checks are to be conducted and the content required. Each centre will develop its own checklist based on DP equipment fitted, vessel power plant, thrusters, reference systems fitted, etc. The flow and layout of the checklist would also be as required by the individual centre. The centre may wish to increase the content of the checklist and is free to do so.

There are items that may be omitted i.e. the below sample has two means of determining vessel capability after worse case failure (DP capability plot and deselecting thrusters). Only one means would be required.

The sample below would take approximately 20 to 25 minutes for someone who is familiar with the DP system/vessel. Ability of the individual student will vary. The students are to use the same checklist for the exam as they do during course exercises. They will also be informed that the checklist is part of the exam.

Some items on the checklist will require the vessel to be set up on DP. Therefore at some point during completion of the checklist, the student will place the vessel in DP mode.

Based on the results of the checklist, the student can request changes to generator, power, switchboard or thruster configurations. The student may also alter the planned approach route and final worksite heading/position, based on the results of the checklist.

Approach to Worksite

After completing the checklist and set up on DP, the student will move the vessel to the worksite. The speeds and methods used by the individual student will vary. If the vessel is outside the 500m zone at the start, this could take considerable time. As a benchmark, a single move of 500m at 0.25m/sec would require 33 minutes. The actual moves during the exam will be undertaken in increments and at varying speeds, making it difficult to indicate an actual time for this item. To reduce time requirements, for exam purposes, the exam may start at a distance of 250 to 300m from the worksite.

At the Worksite

The actual vessel task at the worksite can be as determined by the training centre. This might be diving operations, ROV operations, cargo operations, etc.

The type of practical assessment (i.e. DP operation) should have been reflected or revised during the Revalidation Course.

The last stage of the exam will be introducing a DP fault/failure or environmental change for the student to deal with.

This specification identifies possible faults and indicates that at least two must be utilized. Both can be introduced after the vessel is on location at the worksite but one must be introduced at this stage. The other can be introduced at any stage in the exam after the vessel is set up on DP. Considering the above, the exact timing of fault injection and the faults to be used, with a particular scenario, will be determined by the training centre.

Exam Time Required

If the exam starts at a distance of 250m from the worksite, the total time required for the practical exam should be one to two hours per student. The extent to which the simulated DP operation progresses (after positioning at the worksite) is determined by the training centre.

The first student will require more time as he/she would require time to plan (20 minutes). Subsequent students would get the same amount of planning time but would be doing so while another is being examined.

10.1.3. Practical Assessment Mark Sheet Example

Each Training Centre must ensure that the training objectives are assessed in a proper manner. It might be difficult to assess each student on all training objectives. Therefore, it would be recommended that a selection of training objectives should be covered during the assessment.

Below are the items to be evaluated during the practical assessment. Exercises are to be structured to enable evaluation for the items listed below.

Mark Sheet Exam Number 1

Practical Assessment DP Refresher and competency assessment Course

Name of student: Exercise name/number: Overall Pass/Fail Instructor sign
  1    
Task no: Task description: DP Planning Pass Fail
1 Carry out operational planning, risk assessment and hazard identification tasks.    
2 Evaluate most appropriate PRS for the DP operation, in accordance with the DP class.    
3 Determine the most appropriate final working position and heading.    
4 Identify an emergency escape route.    
  Additional Comments:    
Task no: Task description: DP Set Up Pass Fail
1 Complete DP checklist with accurate recording of data.    
2 Select DP joystick mode. Operate the DP Joystick to maintain position and/or heading in a controlled and safe manner.    
3 Set up the vessel on DP in a controlled and safe manner.    
4 Use correct thruster allocation for the operational and environmental conditions.    
5 Ensure the vessel is on DP in accordance with the vessel’s required class; for the operation being conducted (determine capability).    
6 Determine and set an appropriate alarm and warning limits for the operation being conducted.    
7 Select appropriate gain setting.    
  Additional Comments:    
Task no: Task description: DP Operations Pass Fail
1 Move the vessel to the final working location using appropriate movement steps.    
2 Move the vessel to the final working location at safe speed/speeds.    
3 At the final working location, select appropriate and reliable PRS in accordance with the DP class.    
4 Monitor and recognize any changes in position reference system or sensor performance.    
5 Monitor and recognize any change in power or thrust output.    
6 Monitor and recognize any changes in environmental conditions.    
7 Continue to ensure the vessel is on DP in accordance with the vessel’s required class, for the operation being conducted (monitor capability).    
  Additional Comments:    
Task no: Task description: DP Failure Modes Pass Fail
1 Recognise and respond to fault/system failure/environmental change and associated alarms.

Specify failure mode:

    
2 Recognise and respond to fault/system failure/environmental change and associated alarms.

Specify failure mode:

    
3 Evaluate the possible consequences of each alarm and the effect of continuing the operation.    
4 Change DP Alert status (e.g. from green to amber/yellow, or red) to reflect operational condition.    
  Additional Comments:    

 

DP REFRESHER COURSE TIMETABLE

Below is a suggested timetable, which can be used for the Revalidation Course.

Day 1

Time Subject Comments
AM Registration,

Introduction – Experience mapping

Familiarisation with centre equipment.

 Experience mapping would be a vital part of the Course.

The previous experience and knowledge of the participants must be addressed and acknowledged during the course.
AM Exercise briefing and exercise planning Planning to be monitored by the instructor and guidance given as needed. Guidance can be tailored to incorporate course objectives where the opportunity presents.
Lunch    
PM Run exercise Exercise designed to meet course objectives.
PM Debrief exercise Debrief can be tailored to incorporate course objectives where the opportunity presents.
PM Lecture covering course objectives Centre to decide the content of the lecture, keeping to course objectives.

Day 2

Time Subject Comments
AM Lecture covering course objectives Centre to decide the content of the lecture, keeping to course objectives.
AM Exercise briefing and exercise planning Planning to be monitored by the instructor and guidance given as needed. Guidance can be tailored to incorporate course objectives where the opportunity presents.
Lunch    
PM Run exercise Exercise designed to meet course objectives.
PM Debrief exercise Debrief can be tailored to incorporate course objectives where the opportunity presents.
PM Lecture covering course objectives Centre to decide the content of the lecture, keeping to course objectives.

Day 3

Time Subject Comments
AM Lecture covering course objectives Centre to decide the content of the lecture, keeping to course objectives.
AM Exercise briefing and exercise planning Planning to be monitored by the instructor and guidance given as needed. Guidance can be tailored to incorporate course objectives where the opportunity presents.
Lunch    
PM Run exercise Exercise designed to meet course objectives.
PM Debrief exercise Debrief can be tailored to incorporate course objectives where the opportunity presents.
PM Lecture covering course objectives Centre to decide the content of the lecture, keeping to course objectives.

Day 4

Time Subject Comments
AM Lecture covering course objectives Centre to decide the content of the lecture, keeping to course objectives.
AM Exercise briefing and exercise planning Planning to be monitored by the instructor and guidance given as needed. Guidance can be tailored to incorporate course objectives where the opportunity presents.
Lunch    
PM Run exercise Exercise designed to meet course objectives.
PM Debrief exercise Debrief can be tailored to incorporate course objectives where the opportunity presents.
PM Lecture covering course objectives Centre to decide the content of the lecture, keeping to course objectives.

Day 5

Time Subject Comments
AM Practical and theoretical examination Practical examination on a minimum NI Class B Simulator.

Theoretical On-Line examination.
Lunch    
PM Examination continued, if required.  

DP CHECKLIST

Below is a suggested DP Checklist, which can be used for the Refresher Course.

DP Checklist

Date

Time

Location

Position N E

Water Depth

Lights / Shapes (On/Up) Y / N

Read Latest Forecast Y / N Lamp/Alarm Test Completed & O.K. Y / N System Setup

Controller Online A B

Operator Station in Use 1 2

Centre of Rotation Selected

Speed Setting Knots

Turn Rate Setting °/minute

High Precision Gain Selected Setting: Low Medium High

Customised Gain Selected Setting: Surge Sway Yaw

Alarm Limits

Position Alarm Settings Warning Alarm Enabled Y / N

Heading Alarm Settings Warning Alarm Enabled Y / N

Power

Generators Available #1 #2 #3 #4 #5 #6

Generators Online #1 #2 #3 #4 #5 #6

Main Switchboard Split Y / N

UPS Checked & O.K. Y / N

Propulsion

Thrusters Available for DP Control #1 #2 #3 #4 #5 #6 #7

Thrusters Selected #1 #2 #3 #4 #5 #6 #7

Thruster #3 on Bus 1 Bus 2

Rudders Available for DP Control Port Stbd.

Rudders Selected Port Stbd.

Thruster Mode Selected

Sensors

Gyros Available #1 #2 #3

Gyro in Use #1 #2 #3

Differences Checked & Acceptable Y / N

Vessel Heading in Use 

Wind Sensors Available #1 #2 #3

Wind Sensor in Use #1 #2 #3

Differences Checked & Acceptable Y / N

Wind Speed & Direction in Use Knots  True

VRS Available #1 #2 #3

VRS in Use #1 #2 #3

Differences Checked & Acceptable Y / N

Values Used Heave

Pitch

Roll

Draught Sensor Available Y / N

Draught Input Sensor Manual Operational Transit

Draught Input Checked & Acceptable Y / N Draught in Use m

Position Reference Systems

Available In Use (Accuracies Checked & Acceptable)

Artemis Y / N Y / N

DGPS 1 Y / N Y / N

DGPS 2 Y / N Y / N

Fanbeam Y / N Y / N

HPR 1 Y / N Y / N Transponders

HPR 2 Y / N Y / N Transponders

Radius Y / N Y / N Transponders

Taut Wire Port Y / N Y / N

Taut Wire Stbd. Y / N Y / N

Gate Valves Port: Open / Closed Stbd.: Open / Closed

HPR Poles Port: Down / Up Stbd.: Down / Up

ROV Transponder

Co-ordinate System set to Display UTM Y / N Datum Settings Checked & O.K. Y / N Joystick

Joystick Thrust Reduced Full

Joystick Precision High Speed

General

Low Speed

Joystick Environmental Comp. Surge Sway Yaw

Joystick Operational Y / N

Propulsion Status

Thruster Setpoint/Feedback O.K. Y / N

Rudder Setpoint/Feedback O.K. Y / N

Power Status

Power (if Bus is Common): Used Available

Power (if Bus is Split): Bus 1 Used Available

Bus 2 Used Available

Communications Tested & O.K. (as applicable)

Crane Cab/Cabs  Y / N

Deck (Pipe/Cable Lay) Y / N DP Status Lights Y / N

Dive Control Y / N DP Status Lights Y / N

Engine Control Room  Y / N

ROV Control Y / N DP Status Lights Y / N

Checklists

Dive Checklist Complete Y / N

ROV Checklist Complete Y / N

Engine room Checklist Complete Y / N

Vessel Capability

Consequence Analysis Enabled Y / N

Capability Plot Setup & Checked Y / N

Deselect Thrusters #1, (#3), #5 & #7 (When #3 is connected to BUS 1)

Position Maintained Y / N Reselect Thrusters

Deselect Thrusters #2, (#3), #4 & #6 (When #3 is connected to BUS 2)

Position Maintained Y / N Reselect Thrusters

A vessel on Auto DP for 30 Minutes Y / N DP Current

Alarms Page Checked Y / N

Printer Online Y / N

Print Status Y / N

Signed Date

Signed Date